安裝電梯門套時，需要注意以下幾個方面：

When installing elevator door frames, the following aspects should be noted:

施工前準備

Preparation before construction

檢查材料：仔細檢查門套的材質、規格、顏色是否與訂單一致，有無破損、變形等缺陷。確保線條、飾面板等部件齊全，數量準確。同時，準備好安裝所需的工具，如電鉆、螺絲刀、水平尺、膠槍等。

Material inspection: Carefully check whether the material, specifications, and color of the door frame are consistent with the order, and whether there are any defects such as damage or deformation. Ensure that the lines, decorative panels, and other components are complete and the quantity is accurate. At the same time, prepare the necessary tools for installation, such as drills, screwdrivers, level rulers, glue guns, etc.

測量門洞：使用精準的測量工具，對電梯門洞的尺寸進行精確測量，包括高度、寬度和垂直度。確保門洞尺寸符合電梯門套的安裝要求，若存在偏差，及時進行調整，以保證門套安裝后能夠與門洞完美貼合。

Measurement of door openings: Use precise measuring tools to accurately measure the dimensions of elevator door openings, including height, width, and verticality. Ensure that the size of the door opening meets the installation requirements of the elevator door frame. If there is any deviation, adjust it in a timely manner to ensure that the door frame can fit perfectly with the door opening after installation.

安裝過程

setup script

基層處理：清理門洞周圍的墻面，確保墻面平整、干凈、干燥，無灰塵、油污和松散的水泥砂漿等雜物。如有不平整之處，需進行打磨或修補，以提供穩定的安裝基礎。

Grassroots treatment: Clean the walls around the door opening to ensure that they are flat, clean, dry, and free of dust, oil stains, loose cement mortar, and other debris. If there are any unevenness, it needs to be polished or repaired to provide a stable installation foundation.

門套安裝：

Door frame installation:

組裝門套：按照說明書或施工規范，將門套的各個部件進行組裝。通常先安裝門套線，注意線條的拼接要緊密、平整，轉角處應采用 45° 拼接或其他合適的拼接方式，確保美觀。

Assemble door frame: Assemble the various components of the door frame according to the instructions or construction specifications. Usually, the door frame line is installed first, and attention should be paid to the tight and smooth splicing of the lines. 45 ° splicing or other suitable splicing methods should be used at corners to ensure aesthetics.

固定門套：將組裝好的門套放入門洞，使用水平尺和垂直尺進行校準，保證門套的水平度和垂直度誤差在允許范圍內。然后通過在門套與墻體之間打入膨脹螺絲或使用專用的門套固定膠等方式，將門套牢固地固定在門洞上。固定點的間距要均勻，且應根據門套的材質和重量合理確定，以確保門套安裝牢固，不會出現松動或變形。

Fixed door frame: Place the assembled door frame into the door opening and calibrate it with a level and vertical ruler to ensure that the horizontal and vertical errors of the door frame are within the allowable range. Then, by inserting expansion screws between the door frame and the wall or using specialized door frame fixing glue, the door frame is securely fixed to the door opening. The spacing between fixed points should be uniform and reasonably determined according to the material and weight of the door frame to ensure that the door frame is installed firmly and will not loosen or deform.

飾面板安裝：如果電梯門套有飾面板，在門套固定好后進行飾面板的安裝。飾面板應平整地粘貼或固定在門套上，注意避免出現氣泡、褶皺或空鼓等現象。使用膠黏劑時，要按照產品說明進行操作，確保粘貼牢固。同時，要注意飾面板的紋路和顏色搭配，保證整體美觀。

Decorative panel installation: If the elevator door frame has decorative panels, install the decorative panels after the door frame is fixed. The decorative panel should be neatly pasted or fixed on the door frame, taking care to avoid phenomena such as bubbles, wrinkles, or hollowing. When using adhesive, follow the product instructions to ensure firm adhesion. At the same time, attention should be paid to the pattern and color matching of the decorative panel to ensure overall aesthetics.

安裝后檢查

Check after installation

外觀檢查：查看門套的表面是否平整、光滑，有無劃痕、磕碰或掉漆等現象。檢查門套線的拼接處是否嚴密，縫隙是否均勻一致，轉角處是否圓潤、自然。飾面板的安裝是否平整，顏色和紋路是否協調統一。

Appearance inspection: Check whether the surface of the door frame is flat, smooth, and free of scratches, bumps, or paint peeling. Check if the joints of the door frame lines are tight, if the gaps are uniform and consistent, and if the corners are rounded and natural. Whether the installation of decorative panels is smooth, and whether the color and pattern are coordinated and unified.

功能檢查：檢查門套與電梯門的配合是否順暢，電梯門開關時是否會與門套發生摩擦或碰撞。確保門套安裝不會影響電梯的正常運行，電梯門能夠正常開啟和關閉，且關閉后密封良好。

Function check: Check if the door frame fits smoothly with the elevator door, and if there is any friction or collision between the door frame and the elevator door when it is opened or closed. Ensure that the installation of door frames does not affect the normal operation of the elevator, and that the elevator doors can be opened and closed normally, with good sealing after closure.

牢固性檢查：輕輕搖晃門套，檢查其是否安裝牢固，有無松動或晃動的情況。檢查膨脹螺絲或固定膠的固定效果，如有發現松動的部位，及時進行加固處理。

Robustness check: Gently shake the door frame to check if it is securely installed and if there is any looseness or shaking. Check the fixing effect of expansion screws or fixing glue, and if any loose parts are found, promptly reinforce them.

本文由聊城鋁合金電梯門套友情奉獻.更多有關的知識請點擊:http://www.hmqczz.com我們將會對您提出的疑問進行詳細的解答，歡迎您登錄網站留言.

This article is dedicated to friendship For more information, please click: We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message