門禁系統安裝難點在于電鎖的安裝，裝什么電鎖主要由門決定。您在咨詢電鎖廠家客服時，客服都會問是什么門呢？按我們常用的門分類，可以分為玻璃門、木門、金屬門。今天廣州真地小編給大家分析分析，玻璃門應該安裝電插鎖還是磁力鎖。

　　The difficulty in installing access control systems lies in the installation of electric locks, which are mainly determined by the door. When you consult the customer service of the electric lock manufacturer, they always ask what door it is? According to our commonly used door classification, it can be divided into glass doors, wooden doors, and metal doors. Today, the Guangzhou Zhendi editor will analyze for you whether to install electric plug-in locks or magnetic locks for glass doors.

　　電插鎖暗裝顯得美觀，可以實現180度內外開門，但不如磁力鎖結實耐用，需要挖鎖孔，施工安裝比較復雜，可以用在以下3種玻璃門：

　　The concealed installation of the electric plug lock looks beautiful and can achieve a 180 degree inside and outside door opening, but it is not as sturdy and durable as the magnetic lock. It requires digging a lock hole, and the construction and installation are relatively complex. It can be used for the following three types of glass doors:

　　1、上下包邊的玻璃門

　　1. Glass doors with upper and lower edges

　　上下包邊的玻璃門，建議安裝電插鎖，不需要使用任何額外的配件，上門框的垂直厚度要＞4.5cm，因為電插鎖是暗裝，要將鎖體埋入門框內，要求玻璃門上下有包邊。

　　For glass doors with upper and lower edge wrapping, it is recommended to install an electric plug lock without the need for any additional accessories. The vertical thickness of the door frame should be greater than 4.5cm, as the electric plug lock is concealed and the lock body needs to be embedded in the door frame. The glass door should have edge wrapping on both sides.

　　2、上有包邊下無包邊的玻璃門

　　2. A glass door with a wrapped edge on top and no wrapped edge on the bottom

　　上有包邊下無包邊的玻璃門，上門框的垂直厚度＞4.5cm，建議使用電插鎖，借助下門夾固定鎖孔，電插鎖鎖體安裝如上下包邊的玻璃門安裝電插鎖的方法。

　　For glass doors with wrapped edges on the top and no wrapped edges on the bottom, if the vertical thickness of the upper door frame is greater than 4.5cm, it is recommended to use an electric plug lock. Use the lower door clamp to fix the lock hole, and install the electric plug lock body on the glass door with wrapped edges on the top and bottom.

　　3、上下無包邊的玻璃門

　　3. Glass doors without borders on top and bottom

　　上下無包邊的玻璃門，上門框的垂直厚度＞4.5cm，需要借助上門夾固定電插鎖，下門夾固定鎖孔。

　　For glass doors without edge wrapping, if the vertical thickness of the upper door frame is greater than 4.5cm, it is necessary to use an upper door clamp to fix the electric plug lock, and a lower door clamp to fix the lock hole.

　　比較大型的玻璃門可以安裝磁力鎖，足夠結實耐用，上下包邊的大型玻璃門看作是木門，要求門框超過門的垂面3cm以上，無須支架；當門框不夠寬時，借助L支架拓展門框寬度，讓磁力鎖得以“掛起來”，內開門方向考慮美觀，磁力鎖借助LZ支架輔助安裝，不用裝在外面。

　　Larger glass doors can be equipped with magnetic locks, which are sturdy and durable enough. Large glass doors with upper and lower edges are considered wooden doors, requiring the door frame to exceed the vertical surface of the door by more than 3cm without the need for brackets; When the door frame is not wide enough, use the L bracket to expand the width of the door frame, allowing the magnetic lock to "hang up". Considering the aesthetic direction of the inner door opening, the magnetic lock can be installed with the assistance of the LZ bracket without being installed on the outside.

　　上有包邊下無包邊的大型玻璃門需要使用輔助U型支架。

　　Large glass doors with wrapped edges on top and no wrapped edges on the bottom require the use of auxiliary U-shaped brackets.

　　本文由  山東不銹鋼玻璃門    友情奉獻.更多有關的知識請點擊  http://www.hmqczz.com/   真誠的態度.為您提供為全面的服務.更多有關的知識我們將會陸續向大家奉獻.敬請期待.

　　This article is a friendly contribution from Shandong Stainless Steel Glass Door For more related knowledge, please click http://www.hmqczz.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.